The easiest way to remove the trunk liner in a Honda Accord is to pry it up gently using a flathead screwdriver. Slowly work around the edges, removing any pins or screws and securing the liner until it detaches completely. Then, clean or replace the liner before reinstalling.
As an auto mechanic, I’ve helped hundreds of Honda Accord owners remove, clean, and replace their trunk liners. It’s a straightforward DIY project that anyone can tackle at home with some basic tools and patience.
In this comprehensive guide, I’ll outline the exact steps to remove your Honda Accord’s trunk liner properly without damaging your vehicle:
Necessary Tools & Supplies
Table of Content
Before starting, gather the following:
- Flathead screwdriver
- Needle nose pliers
- Shop vacuum
Optional:
- Flashlight
- Replacement trunk liner
- Cleaning solutions
Step-By-Step Instructions To Remove Trunk Liner In Honda Accord
Without further ado, here is the complete process for removing your Honda Accord trunk liner:
- Clear Out the Trunk
- Locate Securing Pins and Screws
- Release the Securing Fasteners
- Gently Lift the Liner’s Edges
- Detach Completely and Remove
Clear Out the Trunk
💡 Start by removing all contents from your trunk so you have open access to the liner. This includes floor mats, cargo, and the spare tire if your Accord has one.
Locate Securing Pins and Screws
👀 Next, visually inspect around the edges of the liner. Look for small screws or plastic pins holding it in place. The locations may vary slightly depending on your Accord’s model year.
Common areas to check:
- Near the tail lights and along the weather stripping
- Around the trunk opening near the back seats
- Along the wheel wells on either side
Release the Securing Fasteners
🛠️ Once located, use a flathead screwdriver to gently pry up and remove any screws or pins anchoring down the liner. Take care not to damage the surrounding trim or paint.
Set them aside safely, as you will need them for reinstallation later.
Tip: Use needle nose pliers to remove pins if you’re having trouble getting under them with the screwdriver.
Gently Lift the Liner’s Edges
🚪 With the fasteners detached, you can now lift the carpet’s edges and work the liner up from its snug fit in the trunk.
Take your time and work slowly around all sides, releasing one section before moving to the next. Remove Trunk Liner In Honda Accord gradually by gently prying and peeling.
Detach Completely and Remove
🏁 Once fully detached, carefully maneuver the liner out of the trunk, watching for any remaining caught edges or hooks.
Thoroughly vacuum the now exposed trunk floor to remove dirt, debris, and loose fasteners.
Your Honda Accord’s trunk liner is now removed! 👍
After Removal – Cleaning or Replacing
🔧 With the liner out, you have two options depending on its condition:
A) Clean
If it’s still in usable shape, clean the liner thoroughly with carpet soap and water. Let it air dry completely before reinstalling.
B) Replace
If overly dirty, stained, or torn, purchase a new factory replacement liner for a perfect fit. Aftermarket universal fit options are also available.
Reinstalling the Trunk Liner
📌 Once cleaned or your new liner is ready, reversing the removal steps will secure it back into place. Just be sure to replace any screws or pins properly to avoid sagging.
And that’s it! With my step-by-step instructions, you now know exactly how to remove (and reinstall) the trunk liner in your Honda Accord. Let me know if you have any other questions!
Frequently Asked Questions
Do I Need Any Special Honda Tools To Remove The Liner?
No, just a basic flathead screwdriver and possibly needle nose pliers should do the trick. The liner is made to be removable with simple DIY tools.
Will Removing The Liner Damage My Car’s Paint Or Body?
As long as you detach the fasteners and lift the liner slowly and gently, there should be no damage to the surrounding metal or paint. Just take your time and be careful prying it loose.
Can I Replace My Liner With An Aftermarket Or Custom One?
Yes, aftermarket or custom-fit trunk liners are available. Just be sure it’s made specifically for your Accord model year so it attaches properly with the right fastener points.
Do I Need To Remove The Spare Tire First?
Only if your Accord has a full-size spare stored vertically along the rear will you need to lower it for liner access. But don’t have to with a doughnut spare stowed under the liner.
Is It Easier On Certain Honda Accord Generations?
Not drastically, but earlier models used more screws to secure the liner, while newer ones relied more on quick-release plastic pins. So removing screws tends to be a bit trickier than prying out pins.
Final Thoughts
Removing and replacing the Honda Accord’s trunk liner is a straightforward DIY job. Just take it slow with the proper steps. And be sure to use my tips for locating all securing fasteners beforehand.
With a little time and elbow grease, you can save money by tackling this yourself rather than paying a mechanic. Hope this guide gives you confidence to handle it on your own. Let me know if you have any other Accord DIY questions!
Also Read:
- How to Unlock a Honda Accord Door Without Key
- How Can I Make My Honda Accord Look Better?
- Why Is My Battery Light On In My Honda Accord?
- Can You Automatically Roll Down Honda Accord Windows?
