The Honda Accord lug nuts secure the wheels to the vehicle’s hub assembly. They must be tightened to the specified torque to ensure the wheel is properly secured.
Honda Accord lug nuts have an M12 x 1.5 thread pitch. This means the lug nut has a diameter of 12mm and there are 1.5 threads per millimeter on the nut.
The proper Honda Accord lug nut torque for this thread pitch is 120-130 Nm or 88-96 ft-lbs. It’s critical to use a calibrated torque wrench to achieve the proper torque when installing the lug nuts.
Many technicians also recommend 80 ft-lbs that is generally fine.
Below are the general guide lines for all Honda Models:
Model | Year | Trim | Lug Nut Torque (ft-lbs) |
|---|---|---|---|
Accord | 1982 – 2022 | All | 80 |
Civic | 1984 – 2019 | All/LX | 80 |
Clarity | 2019 | All | 80 |
Crosstour | 2010 – 2015 | 17″ Base/EX | 80 |
CR-V | 1997 – 2019 | All/All | 80 |
CRX | 1984 – 1991 | All/HF | 80 |
CR-Z | 2011 – 2016 | 16″ Base/All | 80 |
Del Sol | 1993 – 1997 | All/S | 80 |
Element | 2003 – 2011 | 2WD/DX/EX | 80 |
EV Plus | 1997 – 1999 | All/Hatchback | 80 |
Fit | 2007 – 2019 | 14-inch/Base | 80 |
HR-V | 2016 – 2019 | 17″ Base/LX/EX/EX-L | 80 |
Insight | 2000 – 2019 | All/All | 80 |
Odyssey | 1995 – 2004 | All/LX/EX | 80 |
Odyssey | 2005 – 2019 | Pax/Touring | 95 |
Passport | 1994 – 2019 | 2WD/P215/75R15 | 95 |
Pilot | 2003 – 2008 | LX/EX/SUV | 80 |
Pilot | 2009 – 2015 | 17″ Base/LX/EX/EX-L | 90 |
Pilot | 2016 – 2019 | 18″ Base/LX/EX/EX-L | 95 |
Prelude | 1985 – 2001 | All/Base/SI | 80 |
Ridgeline | 2006 – 2019 | All/RTS/RTL | 95 |
S2000 | 2000 – 2009 | 2 Door/Convertible | 80 |
Save this image for all models:
So, if you are searching for:
- 2004 Honda Accord Lug Nut Torque
- 2018 Honda Accord Lug Nut Torque
- 2015 Honda Accord Lug Nut Torque
- 2007 Honda Accord Lug Nut Torque
- 2016 Honda Accord Lug Nut Torque
- 2009 Honda Accord Lug Nut Torque
- 1992 Honda Accord Lug Nut Torque
- 2021 Honda Accord Lug Nut Torque
- 2003 Honda Accord Lug Nut Torque
- 2011 Honda Accord Lug Nut Torque
- 2014 Honda Accord Lug Nut Torque
- 2002 Honda Accord Lug Nut Torque
- 2008 honda accord lug nut torque
- 2007 Honda Accord Lug Nut Torque
- 2002 Honda Accord Lug Nut Torque
General instruction is 80 ft-lbs and my recommendation is 88-96 ft-lbs.
Why Proper Torque is Essential
Table of Content
There are several key reasons why applying the proper Honda Accord lug nut torque is so important:
Safety
The most critical reason to properly torque the lug nuts is safety. If the torque is too low, the wheels may not be fully secured and could come loose while driving. This could lead to a wheel literally falling off the vehicle, resulting in a serious crash.
Prevent Damage
Using excessive torque on the lug nuts can damage the threads on the wheel hub or even stretch or break the studs. This could make removing the lug nuts very difficult.
Extend Service Life
Applying the specified Honda Accord lug nut torque helps ensure the wheel assembly remains in good condition. The proper torque reduces stress on components so they last longer.
Maintain Performance
The wheels must be fully secured without placing uneven stress on the lugs. The proper torque results in optimal braking and handling performance.
Step-by-Step Torque Procedure
Follow these steps to properly torque the lug nuts on a Honda Accord:
1. Lightly Snug Lug Nuts
After mounting the wheel onto the hub, initially tighten each lug nut by hand until it is just snug.
2. Tighten in Star Pattern
Using a torque wrench, tighten the lug nuts incrementally in a star pattern. Tighten diagonally across from each other.
3. Tighten to Specified Torque
Continue in the star pattern until each lug nut is tightened to the specified torque of 120-130 Nm or 88-96 ft-lbs.
4. Retorque After Driving
It’s essential to re-torque the lug nuts after driving around 100 km (60 miles). The wheel settling onto the hub can cause some relaxation of the nuts.
Hazards of Incorrect Lug Nut Torque
Applying improper torque to the Honda Accord lug nuts can lead to some serious consequences:
Under-Torqued Lug Nuts
If the lug nuts are not tightened to the specified torque, the wheel will not be securely fastened to the vehicle. This greatly increases the chances of a wheel coming loose while driving.
Over-Torqued Lug Nuts
Excessive torque can stretch or break the wheel studs. It can also damage the threads on the hub, making the lug nuts very difficult to remove.
Uneven Torque
If some lug nuts are tighter than others, it can create uneven stress. This can warp the brake rotors and cause vibration and handling issues.
Damaged Studs
Incorrect torque either under or over tightening can damage or break the wheel studs. Broken studs make it impossible to securely mount the wheel.
Use Proper Tools
Using the proper tools helps ensure lug nuts are tightened correctly:
- Use a torque wrench suitable for the lug nut size and torque range. It must be recently calibrated for accuracy.
- Only use a six-sided lug nut socket that precisely fits the lug nut.
- A lug nut impact socket is ideal since it has a 1/2″ head to fit torque wrenches.
- Never use a 12-point socket, which can round off the corners of the nut.
Tool | Purpose |
|---|---|
Torque wrench | Apply precise torque to lug nuts |
6-sided lug nut socket | Fits precisely on the lug nut |
Impact socket | Has 1/2″ head to fit torque wrench |
Lug Nut Maintenance
Proper maintenance is key to keeping lug nuts in optimum condition:
- When installing new lug nuts, apply a lightweight oil like WD-40 to the threads. This prevents corrosion.
- Check torque after changing a tire before excessive driving.
- Have lug nut torque checked at every oil change interval.
- Replace any lug nuts that are severely rusted or damaged.
- For aftermarket wheels, use lug nuts supplied by the manufacturer.
Related Topics:
Conclusion
The lug nuts on your Honda Accord serve the critical purpose of securing the wheels. Taking the time to properly torque the lug nuts to the specification of 120-130 Nm or 88-96 ft-lbs is essential to your safety. Always use a calibrated torque wrench and tighten in a star pattern. Avoid potential hazards by not under or over-tightening the lug nuts. With proper torque and ongoing maintenance, your Honda Accord wheels will remain securely attached.
